functions

frequency

Frequency

The carrier frequency is automatically adjusted based on the load features.

Resolution

Analog setting: maximum frequency x 0.025%

• Closed-loop vector control (CLVC)

• Voltage/Frequency (V/F) control

• P type: 0.5 Hz/100%

capacity

• P type: 60s for 120% of the rated current, 3s for 150% of the rated current

• N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power,square)

Four groups of acceleration/deceleration time with the range of 0.0–6500.0s

Braking time: 0.0–36.0s

Braking action current value: 0.0%–100.0%

JOG acceleration/deceleration time: 0.0–6500.0s

multiple preset

of DI terminal states.

regulation

changes.

Over current

stall Control

process so as to avoid frequent tripping due to over voltage/over current.

limiting function

control

tripping during the running process.

Torque control can be implemented in the CLVC mode.

functions

performance

through the high-performance current vector control technology.

Through

AC drive can continue to run for a short time.

limit

switchover

communication

and CAN open.

Protection

temperature sensor input (PT100, PT1000) so as to realize motor

overheat protection.

Types

encoder, resolver, UVW encoder, and SIN/COS encoder.

command source

You can perform switchover between these sources in various ways.

voltage setting, analog current setting, pulse setting and serial

communication port setting.

You can perform switchover between these sources in various ways.

frequency source

auxiliary frequency and frequency synthesis.

5 digital input (DI) terminals, one of which supports up to

100 kHz high-speed pulse input

2 analog input (AI) terminals, one of which only supports

0–10 V voltage input and the other supports 0–10 V voltage

input or 4–20 m A current input

Expanding capacity:

5 DI terminals

1 AI terminal that supports -10–10 V voltage input and also

supports PT100PT1000

1 high-speed pulse output terminal (open-collector) that

supports 0–100 kHz square wave signal output

1 digital output (DO) terminal

1 relay output terminal

1 analog output (AO) terminal that supports 0–20 m A

current output or 0–10 V voltage output

Expanding capacity:

1 DO terminal

1 relay output terminal

1 AO terminal that supports 0–20 m A current output or 0–10

V voltage output

operation on

the operation

panel

copy

replication

function selection

some keys so as to prevent mis-function.

protection, over current protection, over voltage protection, under voltage

protection, overheat protection and overload protection

Location

smoke, vapour, drip or salt.

Temperature

50°C)

System

FIE Variable-frequency Drive series

Inverter model and technical data

Mọi yêu cầu hỗ trợ kỹ thuật về sản phẩm và cũng như yêu cầu báo giá vui lòng liên hệ theo thông tin:

Mr Giang : 0988 568 790 – 0342 257 997

Email: bvtech790@gmail.com