Chứng nhận đại lý
Thiết bị tự động hoá
Biến tần
Động Cơ Servo
Thiết bị đóng cắt
Thiết bị đo lường
TỦ ĐIỆN
PHỤ KIỆN
Tải về /Download
Giải pháp/Ứng dụng
Tài liệu tổng hợp
Tra cứu lỗi biến tần các hãng
Wecon 26 I/O PLC : LX3V-1412MR
◇ Power supply: AC85-265V power, D:DC24V power, 20W rated power output
◇ IO:14xDI/12xDO ( Relay-type )
◇ Port:RS422, RS485, 1 BD board supported.
◇ Protocol: 2N NO PROTOCOL, LX3V PROTOCOL
General |
|||
LX3V Series |
LX3VP Series |
LX3VE/3VM Series |
|
| Running Mode | Round Scan/InterruptRound Scan/ Interrupt | ||
| Programming | Instruction List/LadderInstruction List / Ladder | ||
| Total Instructions | Basic Instructions: 27/Applied Instruction: 136+2 Basic Instructions: 27 /Applied Instruction: 136+2 | 140 140 | |
| Execute Time | Basic Instructions: 0.06us /Applied Instruction: 1~10usBasic Instructions: 0.06us /Applied Instruction: 1~10us | ||
| System Storage | 16k16K | 64k64K | 32k32K |
| Download / Monitor | Serial Programming Cable/ Mini USBSerial Programming Cable/ Mini USB | ||
| High Speed Pulse Output | Transistor Type: 2 Channels(4 channels optional) / Relay N/A(2 channels optional)Transistor : 2 Channels(4 channels optional) / Relay N/A(2 channels optional) | ||
| External Interrupt | 6 Channels6 Channels | ||
| Timer Interrupt | 3 Channels | ||
| Holding Addresses | Adjustable | ||
| Storage | FLASH | ||
| Filter | For all X input terminals | ||
| Serial Port | COM1:RS422 or RS485 | ||
| COM2:RS485 | |||
| Temperature | Operating Temperature：0 ~ 55℃/Storage Temperature：0 ~ 70℃ | ||
| Humidity | 35~85%RH (Without condensation) | ||
| Shock Resistance | JIS C0040 Standard | ||
| Noise Immunity | Noise Voltage:1000Vp-p Pulse; Width:1us; Frequency:30-100Hz (Noise Simulator) | ||
Output |
|||
| Item | Relay Output | Transistor Output | |
| Output Type | — | NPN | |
| Input Power Supply | DC 24V | DC 24V | |
| Output Circuit | <AC 250V;DC 30V | DC 5~30V | |
| COM Port Current | — | <0.1mA(DC 30V) | |
| Insulation | Mechanistic | Optical Coupling | |
| Leak Current | — | 0.1mA/DC 30V | |
| Min.Load | — | DC 5V 2mA | |
| Resistive | 2A point 8A COM port | 0.5A point 0.8A COM port 0.3A HSPO point | |
| Inductive | 80VA | 12W/DC 24V7.2WHSPO point | |
| Max.Load | GeneralGeneral | 100W | 0.9W/DC 24V |
| ON | <10ms | <0.2ms | |
| Response Time | OFF | (Pulse out put terminal：<5us) | |
AC Power Supply |
|||
| Item | LX3V(P)0806M/1208M/1212M/1412M | LX3V(P)1616M/2416M/3624M | |
| Voltage | AC100~240V 50~60Hz | ||
| Power Outage Time | 10ms | ||
| Rush Current | <15A 5ms/AC 100V; <30A 5ms/AC 200V | ||
| Power Fuse | 250V 1A | 250V 3.15A | |
| Power Consumption | <35w | <60w | |
| Power Output | DC 24V 850mA | DC 24V 700mA | |
DC Power Supply |
|||
| Item | LX3V/LX3VP | ||
| Power Supply | DC 24V±10% | ||
| Power Outage Time | 10ms | ||
| Power Fuse | 250V 3.15A | ||
| Rush Current | <15A 1ms/DC 24V | ||
| Power Consumption | <30w | ||
Đánh giá
Chưa có đánh giá nào.