HỖ TRỢ TRỰC TUYẾN

	Hotline Mr Giang 0988 568 790 info@bvtech.tech
	Sales Automations Mr Nghĩa 0777 236 836 kd01.bvtech@gmail.com
	Sales Automations Mr Sơn 093 55 86 871 info@bvtech.tech
	Hotline Kỹ thuật 0938 416 567

CHÍNH SÁCH BÁN HÀNG

HÀNG CHÍNH HÃNG

- Hàng chính hãng, sản phẩm mới 100%, chất lượng cam kết

- Bảo hành tối đa theo chính sách của Hãng

GIAO HÀNG TOÀN QUỐC

- Giao hàng tận nơi trên toàn quốc

THANH TOÁN THUẬN LỢI

Thủ tục thanh toán đơn giản, bạn sẽ thanh toán tiền tại nhà và chỉ thanh toán tiền hàng sau khi nhận hàng.

ĐỔI MỚI TRONG 30 NGÀY

- Được đổi 1-1, trả lại nếu sản phẩm lỗi

- Được trả sản phẩm nếu tư vấn không đúng

Tư vấn & hỗ trợ 24/7

- Miễn phí tư vấn, hỗ trợ kỹ thuật từ xa

Wecon 14 I/O PLC : LX5S-0806M

Mã sản phẩm: LX5S-0806M

Liên hệ

Support to modify the frequency and position while running the pulse;
Supports the highest baud rate: 921600;
Support 100us high speed timer interrupt;
Supports up to 100 high-speed counter interrupts;
Supports E-CAM;
Supports electronic gear;
Supports efficient and stable PID and CCPID auto-tuning;
Supports LX 3V series modules;
USB power supply;
LX5V software;
Execution speed of 0.03us ~ 0.08us.

5S 2.png 5S 1.png

LX5S Model	I/O	Output Type	Pulse Counter	E-CAM	Pulse Output	RS485	BD Board	Module	Power Supply	Ethernet
LX5S-0806MT-A(D)	08/06	Transistor	2	YES	2	1	1	N/A	AC(DC)	N/A
LX5S-0806MR-A(D)	08/06	Relay	2	N/A	0	1	1	N/A	AC(DC)	N/A
LX5S-0806MR2H-A(D)	08/06	Mix	2	YES	2	1	1	N/A	AC(DC)	N/A
LX5S-1208MT-A(D)	12/08	Transistor	2	YES	2	1	1	N/A	AC(DC)	N/A
LX5S-1208MR-A(D)	12/08	Relay	2	N/A	0	1	1	N/A	AC(DC)	N/A
LX5S-1208MR2H-A(D)	12/08	Mix	2	YES	2	1	1	N/A	AC(DC)	N/A

GENERAL

Item	LX5S Series
Running Mode	Round Scan / Interrupt / Event
Programming	Instruction list/ladder diagram
Total Instructions	Basic Instructions: 29 / Application Instructions: 170
Execute time	Basic Instructions: 0.03-0.08us
System Storage	512KB
Download/ Monitoring	Programming cable (serial type) / Micro USB
High Speed Pulse Output	Transistor type; 2 channels/200KHz
High Speed Counter Interrupt	100 Channels
External Input Interrupt	X0-X5 supports both rising and falling edges
Timer Interrupt	100 channels, support 0.1ms interrupt
High Speed Input Single	2 channel 150K Hz; 4 channel 10KHz
High Speed Input AB Phase	1 channel 100K Hz, supports 2 or 4 frequency times, 2 channels 10K Hz, supports 2 or 4 frequency times
Holding Addresses	Adjusted by software
Storage	FLASH
Filter	For all X input terminals
Serial Port	COM1（RS422), COM2（RS485）
Temperature	Working Temperature: 0 ~ 55℃ / Storage Temperature: 0 ~ 70℃
Humidity	35~ 85%RH (Without condensation)
Shock Resistance	JIS C 0040 Standard
Influence Immunity	Meet the IEC61000-4-4 and GB/T 17626.4 standard: Noise voltage amplitude 1KVP-P, pulse width 10us, period 0.3 s, edge time 5ns, duration 1min.
USB Supply	YES

POWER SUPPLY

Item	AC	DC
Power Supply	AC 85~265V 50 ~ 60Hz	DC 24V±10%
Power Outage Time	10ms	10ms
Power Fuse	250V 3.15A	250V 3.15A
Rush Current	<15A 5ms / AC 100V; <30A 5ms / AC 200V	<15A 1ms / DC 24V
Power Consumption	<60W	<30W
Power Output	DC 24V 700mA	<30w(Not include the external power supply for modules)

OUTPUT

Item		Relay	Transistor
Output Mode		—	NPN
Input Power Supply		DC 24V	DC 24V
Output Circuit		<AC 250V or <DC 30	DC 5~30V
COM Port Current		—	<0.1mA (DC 30V)
Insulation		Mechanistic	Optical Coupling
Leak current		—	0.1mA / DC 30V
Min. Load		—	DC5V 2mA
Max. Load	Resistive	2A point 8A COM port	0.5A point 0.8A COM port 0.3A HSPO point
	Inductive	80VA	12W/DC24V 7.2W HSPO point
	General	100W	0.9W/DC 24V
Response Time		<10ms	<0.2ms (Pulse output terminal: <5us)