Wecon 20 I/O PLC : LX3VP-1208MR
◇ Power supply:A: AC100-240V power, D:DC24V power. 20W rated power
◇ IO: 12xDI/8xDO(Relay-type)
◇ Port:2 serial port(RS422/RS485, RS485), 1 BD board supported.
◇ Protocol: 2N NO PROTOCOL, LX3VP PROTOCOL
◇ Support 64K-step ladder.
◇ Support N:N PLC network up to 8 PLCs;
◇ T50~T191 can be changed to 1ms timers by M8028
General | |||
LX3V Series | LX3VP Series | LX3VE/3VM Series | |
Running Mode | Round Scan/InterruptRound Scan/ Interrupt | ||
Programming | Instruction List/LadderInstruction List / Ladder | ||
Total Instructions | Basic Instructions: 27/Applied Instruction: 136+2 Basic Instructions: 27 /Applied Instruction: 136+2 | 140 140 | |
Execute Time | Basic Instructions: 0.06us /Applied Instruction: 1~10usBasic Instructions: 0.06us /Applied Instruction: 1~10us | ||
System Storage | 16k16K | 64k64K | 32k32K |
Download / Monitor | Serial Programming Cable/ Mini USBSerial Programming Cable/ Mini USB | ||
High Speed Pulse Output | Transistor Type: 2 Channels(4 channels optional) / Relay N/A(2 channels optional)Transistor : 2 Channels(4 channels optional) / Relay N/A(2 channels optional) | ||
External Interrupt | 6 Channels6 Channels | ||
Timer Interrupt | 3 Channels | ||
Holding Addresses | Adjustable | ||
Storage | FLASH | ||
Filter | For all X input terminals | ||
Serial Port | COM1:RS422 or RS485 | ||
COM2:RS485 | |||
Temperature | Operating Temperature:0 ~ 55℃/Storage Temperature:0 ~ 70℃ | ||
Humidity | 35~85%RH (Without condensation) | ||
Shock Resistance | JIS C0040 Standard | ||
Noise Immunity | Noise Voltage:1000Vp-p Pulse; Width:1us; Frequency:30-100Hz (Noise Simulator) | ||
Output | |||
Item | Relay Output | Transistor Output | |
Output Type | — | NPN | |
Input Power Supply | DC 24V | DC 24V | |
Output Circuit | <AC 250V;DC 30V | DC 5~30V | |
COM Port Current | — | <0.1mA(DC 30V) | |
Insulation | Mechanistic | Optical Coupling | |
Leak Current | — | 0.1mA/DC 30V | |
Min.Load | — | DC 5V 2mA | |
Resistive | 2A point 8A COM port | 0.5A point 0.8A COM port 0.3A HSPO point | |
Inductive | 80VA | 12W/DC 24V7.2WHSPO point | |
Max.Load | GeneralGeneral | 100W | 0.9W/DC 24V |
ON | <10ms | <0.2ms | |
Response Time | OFF | (Pulse out put terminal:<5us) | |
AC Power Supply | |||
Item | LX3V(P)0806M/1208M/1212M/1412M | LX3V(P)1616M/2416M/3624M | |
Voltage | AC100~240V 50~60Hz | ||
Power Outage Time | 10ms | ||
Rush Current | <15A 5ms/AC 100V; <30A 5ms/AC 200V | ||
Power Fuse | 250V 1A | 250V 3.15A | |
Power Consumption | <35w | <60w | |
Power Output | DC 24V 850mA | DC 24V 700mA | |
DC Power Supply | |||
Item | LX3V/LX3VP | ||
Power Supply | DC 24V±10% | ||
Power Outage Time | 10ms | ||
Power Fuse | 250V 3.15A | ||
Rush Current | <15A 1ms/DC 24V | ||
Power Consumption | <30w |
Đánh giá
Chưa có đánh giá nào.