Chứng nhận đại lý
Thiết bị tự động hoá
Biến tần
Động Cơ Servo
Thiết bị đóng cắt
Thiết bị đo lường
TỦ ĐIỆN
PHỤ KIỆN
Tải về /Download
Giải pháp/Ứng dụng
Tài liệu tổng hợp
Tra cứu lỗi biến tần các hãng
Wecon 20 I/O PLC : LX5S-1208M
- Support to modify the frequency and position while running the pulse;
- Supports the highest baud rate: 921600;
- Support 100us high speed timer interrupt;
- Supports up to 100 high-speed counter interrupts;
- Supports E-CAM;
- Supports electronic gear;
- Supports efficient and stable PID and CCPID auto-tuning;
- Supports LX 3V series modules;
- USB power supply;
- LX5V software;
- Execution speed of 0.03us ~ 0.08us.
| LX5S Model | I/O | Output Type | Pulse
Counter |
E-CAM | Pulse Output | RS485 | BD Board | Module | Power Supply | Ethernet |
| LX5S-0806MT-A(D) | 08/06 | Transistor | 2 | YES | 2 | 1 | 1 | N/A | AC(DC) | N/A |
| LX5S-0806MR-A(D) | 08/06 | Relay | 2 | N/A | 0 | 1 | 1 | N/A | AC(DC) | N/A |
| LX5S-0806MR2H-A(D) | 08/06 | Mix | 2 | YES | 2 | 1 | 1 | N/A | AC(DC) | N/A |
| LX5S-1208MT-A(D) | 12/08 | Transistor | 2 | YES | 2 | 1 | 1 | N/A | AC(DC) | N/A |
| LX5S-1208MR-A(D) | 12/08 | Relay | 2 | N/A | 0 | 1 | 1 | N/A | AC(DC) | N/A |
| LX5S-1208MR2H-A(D) | 12/08 | Mix | 2 | YES | 2 | 1 | 1 | N/A | AC(DC) | N/A |
GENERAL
| Item | LX5S Series |
| Running Mode | Round Scan / Interrupt / Event |
| Programming | Instruction list/ladder diagram |
| Total Instructions | Basic Instructions: 29 / Application Instructions: 170 |
| Execute time | Basic Instructions: 0.03-0.08us |
| System Storage | 512KB |
| Download/ Monitoring | Programming cable (serial type) / Micro USB |
| High Speed Pulse Output | Transistor type; 2 channels/200KHz |
| High Speed Counter Interrupt | 100 Channels |
| External Input Interrupt | X0-X5 supports both rising and falling edges |
| Timer Interrupt | 100 channels, support 0.1ms interrupt |
| High Speed Input Single | 2 channel 150K Hz;
4 channel 10KHz |
| High Speed Input AB Phase | 1 channel 100K Hz, supports 2 or 4 frequency times,
2 channels 10K Hz, supports 2 or 4 frequency times |
| Holding Addresses | Adjusted by software |
| Storage | FLASH |
| Filter | For all X input terminals |
| Serial Port | COM1（RS422),
COM2（RS485） |
| Temperature | Working Temperature: 0 ~ 55℃ / Storage Temperature: 0 ~ 70℃ |
| Humidity | 35~ 85%RH (Without condensation) |
| Shock Resistance | JIS C 0040 Standard |
| Influence Immunity | Meet the IEC61000-4-4 and GB/T 17626.4 standard:
Noise voltage amplitude 1KVP-P, pulse width 10us, period 0.3 s, edge time 5ns, duration 1min. |
| USB Supply | YES |
POWER SUPPLY
| Item | AC | DC |
| Power Supply | AC 85~265V 50 ~ 60Hz | DC 24V±10% |
| Power Outage Time | 10ms | 10ms |
| Power Fuse | 250V 3.15A | 250V 3.15A |
| Rush Current | <15A 5ms / AC 100V; <30A 5ms / AC 200V | <15A 1ms / DC 24V |
| Power Consumption | <60W | <30W |
| Power Output | DC 24V 700mA | <30w(Not include the external power supply for modules) |
OUTPUT
| Item | Relay | Transistor | |
| Output Mode | — | NPN | |
| Input Power Supply | DC 24V | DC 24V | |
| Output Circuit | <AC 250V or <DC 30 | DC 5~30V | |
| COM Port Current | — | <0.1mA (DC 30V) | |
| Insulation | Mechanistic | Optical Coupling | |
| Leak current | — | 0.1mA / DC 30V | |
| Min. Load | — | DC5V 2mA | |
| Max. Load | Resistive | 2A point 8A COM port | 0.5A point 0.8A COM port 0.3A HSPO point |
| Inductive | 80VA | 12W/DC24V 7.2W HSPO point | |
| General | 100W | 0.9W/DC 24V | |
| Response Time | <10ms | <0.2ms
(Pulse output terminal: <5us) |
|
Đánh giá
Chưa có đánh giá nào.