Wecon 32 I/O PLC : LX5S-1616M
- Supports to modify frequency and position during pulse running;
- Supports the highest baud rate: 921600;
- Supports 100us high-speed timer interrupt;
- Supports up to 100 high-speed counter interrupts;
- Supports E-CAM;
- Supports electronic gear;
- Supports efficient and stable PID and CCPID self-tuning;
- Supports LX 3V series modules;
- USB power supply;
- LX5V Software;
- 0.03us~0.08us execution speed.
LX5S Model | I/O | Output Type | Pulse Counter | E-CAM | Pulse Output | RS485 | BD Board | Module | Power Supply | Ethernet |
LX5S-1616MT-A(D/AN/DN) | 16/16 | Transistor | 6 | YES | 2 | 2 | 2 | YES | AC(DC) | Optional |
LX5S-1616MR-A(D/AN/DN) | 16/16 | Relay | 6 | N/A | 0 | 2 | 2 | YES | AC(DC) | Optional |
LX5S-1616MR2H-A(D/AN/DN) | 16/16 | Mix | 6 | YES | 2 | 2 | 2 | YES | AC(DC) | Optional |
LX5S-1616MT4H-A(D/AN/DN) | 16/16 | Transistor | 6 | YES | 4 | 2 | 2 | YES | AC(DC) | Optional |
LX5S-2416MT-A(D/AN/DN) | 24/16 | Transistor | 6 | YES | 2 | 2 | 2 | YES | AC(DC) | Optional |
LX5S-2416MR-A(D/AN/DN) | 24/16 | Relay | 6 | N/A | 0 | 2 | 2 | YES | AC(DC) | Optional |
LX5S-2416MR2H-A(D/AN/DN) | 24/16 | Mix | 6 | YES | 2 | 2 | 2 | YES | AC(DC) | Optional |
LX5S-2416MT4H-A(D/AN/DN) | 24/16 | Transistor | 6 | YES | 4 | 2 | 2 | YES | AC(DC) | Optional |
GENERAL
Item | LX5S Series |
Running Mode | Round Scan / Interrupt / Event |
Programming | Instruction list/ladder diagram |
Total Instructions | Basic Instructions: 29 / Application Instructions: 170 |
Execute time | Basic Instructions: 0.03-0.08us |
System Storage | 512KB |
Download/ Monitoring | Programming cable (serial type) / Micro USB |
High Speed Pulse Output | Transistor type; 2 channels/200KHz |
External Input Interrupt | X0-X5 supports both rising and falling edges |
Timer Interrupt | 100 channels, support 0.1ms interrupt |
High Speed Input Single | 6 channel 150K Hz; |
High Speed Input AB Phase | 3 channel 100K Hz, supports 2 or 4 frequency times;
|
Holding Addresses | Adjusted by software |
Storage | FLASH |
Filter | For all X input terminals |
Serial Port | COM1(RS422 / RS485), COM2(RS485) |
Temperature | Working Temperature: 0 ~ 55℃ / Storage Temperature: 0 ~ 70℃ |
Humidity | 35~ 85%RH (Without condensation) |
Shock Resistance | JIS C 0040 Standard |
Influence Immunity | Meet the IEC61000-4-4 and GB/T 17626.4 standard: Noise voltage amplitude 1KVP-P, pulse width 10us, period 0.3 s, edge time 5ns, duration 1min. |
USB Supply | YES |
POWER SUPPLY
Item | AC | DC |
Power Supply | AC 85~265V 50 ~ 60Hz | DC 24V±10% |
Power Outage Time | 10ms | 10ms |
Power Fuse | 250V 3.15A | 250V 3.15A |
Rush Current | <15A 5ms / AC 100V; <30A 5ms / AC 200V | <15A 1ms / DC 24V |
Power Consumption | <60W | <30W |
Power Output | DC 24V 700mA | <30w(Not include the external power supply for modules) |
OUTPUT
Item | Relay | Transistor | |
Output Mode | — | NPN | |
Input Power Supply | DC 24V | DC 24V | |
Output Circuit | <AC 250V or <DC 30 | DC 5~30V | |
COM Port Current | — | <0.1mA (DC 30V) | |
Insulation | Mechanistic | Optical Coupling | |
Leak current | — | 0.1mA / DC 30V | |
Min. Load | — | DC5V 2mA | |
Max. Load | Resistive | 2A point 8A COM port | 0.5A point 0.8A COM port 0.3A HSPO point |
Inductive | 80VA | 12W/DC24V 7.2W HSPO point | |
General | 100W | 0.9W/DC 24V | |
Response Time | <10ms | <0.2ms (Pulse output terminal: <5us) |
Đánh giá
Chưa có đánh giá nào.